| Title |
The fiber-optic non-contact piezomechanical nano-micro positioning, manipulating and measurement system / |
| Authors |
Kleiza, Vytautas ; Verkelis, Jonas |
| Full Text |
|
| Is Part of |
Journal of vibroengineering. 2008, Vol. 10, no. 2, p. 180-183.. ISSN 1392-8716 |
| Keywords [eng] |
Fiber-optic sensor ; Nanometric displacement measurement ; Piezoelectric actuator ; Experiment |
| Abstract [eng] |
A non-contact fiber-optical piezomechanical (FOP) nano-micropositioning, manipulating and measuring system has been developed and investigated. The system consists of a non-contact fiber one optopair reflection sensor with a semiconductor light source (light diode), a reflected light receiver with a p-i-n photo diode, an amplifier of electronic signals, and a positioning device, the resolution of which is 0.5 mu m. The diameter of the fiber sensor measuring head is 3 mm and its length is 10 mm. The positioning device is fixed in front of a mirror. The diameter of fiber core is 100 mu m and the external diameter is 125 mu m (WF100/110/125P22). Fiber length may reach up to 200 m. The FOP system also has a piezoceramics positioning and manipulating system with a mirror. The piezoceramics system is fastened to the positioning device. The dependence of the fiber sensor signal U on the distance h to the mirror, located on piezoceramics, has been measured. The obtained U-h characteristic has a peak on two parts of linear dependence of an increasing and decreasing signal. Sensitivity of the U-h linear part in front of the peak is higher and equal to 1.6725 nW/nm, and that of the decreasing signal part is 1.388 nW/nm. These parts can be used for displacement indication and measurement. |
| Type |
Journal article |
| Language |
English |
| Publication date |
2008 |
| CC license |
|
